DTF Printing Pressing Instructions

To get the best results from your DTF gang sheets, follow these step-by-step heat press instructions. Whether you're applying to cotton, polyester, or blends, our prints are designed for smooth, long-lasting application.

✅ Required Equipment

  • Heat press machine (Not recommended: home iron or Cricut EasyPress)

  • Teflon sheet or parchment paper (for second press)

  • Clean, flat garment surface

🔥 Pressing Settings

Setting Recommendation
Temperature 300°F to 315°F (150°C – 160°C)
Pressure Firm / Heavy
Time 10 to 15 seconds
Peel Method Hot peel or cold peel (your choice)
Second Press 5 seconds with parchment or Teflon sheet

📦 Step-by-Step Application Guide

1. Pre-Press Your Garment

  • Place the garment on your heat press.

  • Press for 5 seconds to remove moisture and wrinkles.

2. Position Your Transfer

  • Lay your Golden State DTF transfer film design-side up on the garment.

  • Ensure it’s aligned and centered.

3. Press the Transfer

  • Set your heat press to 300–315°F with firm pressure.

  • Press the transfer for 10 to 15 seconds.

4. Peel the Film

  • Hot Peel Option: Peel the PET film right away for a matte look and strong adhesion.

  • Cold Peel Option: Wait 10–20 seconds and peel once it cools for a smoother finish.

5. Second Press (Highly Recommended)

  • Cover the design with a Teflon sheet or parchment paper.

  • Press again for 5 seconds to lock in durability, smooth the print, and improve wash resistance.

🧺 Washing & Care Instructions

  • Wait 24 hours before first wash

  • Wash inside out with cold water

  • Tumble dry low or hang dry

  • Do not bleach

  • Do not dry clean

  • Avoid ironing directly over the print

⚠️ Common Pressing Mistakes to Avoid

  • Low pressure → Can cause transfers to peel

  • Too short press time → Ink won’t fully bond to fabric

  • Wrong temperature → May result in faded prints or partial adhesion

  • No second press → Can reduce durability and wash life

Need Help?

If your transfer didn’t apply correctly, double-check your:

  • Heat press temperature accuracy (use a laser thermometer if needed)

  • Garment material — some blends need slight pressure/time adjustments

  • Pressure level — most failures are due to not using firm enough pressure

Still have issues? Contact our support team — we’re here to help troubleshoot!

📧 Email: info@goldenstatedtf.com